Time-Resolved Structural Kinetics of an Organic Mixed Ionic–Electronic Conductor

The structure and packing of organic mixed ionic–electronic conductors have an especially significant effect on transport properties. In operating devices, this structure is not fixed but is responsive to changes in electrochemical potential, ion intercalation, and solvent swelling. Toward this end, the steady-state and transient structure of the model organic mixed conductor, poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS), is characterized using multimodal time-resolved operando techniques. Steady-state operando X-ray scattering reveals a doping-induced lamellar expansion of 1.6 Å followed by 0.4 Å relaxation at high doping levels. Time-resolved operando X-ray scattering reveals asymmetric rates of lamellar structural change during doping and dedoping that do not directly depend on potential or charging transients. Time-resolved spectroscopy establishes a link between structural transients and the complex kinetics of electronic charge carrier subpopulations, in particular the polaron–bipolaron equilibrium. These findings provide insight into the factors limiting the response time of organic mixed-conductor-based devices, and present the first real-time observation of the structural changes during doping and dedoping of a conjugated polymer system via X-ray scattering.     

GeTe中铁电极化对自旋霍尔电导的调控研究

利用电场控制电荷的自旋流与电流相互转换是自旋电子器件的关键所在,而这种控制机制在铁电半导体GeTe中可以得到实现,因为其铁电极化可以改变自身的自旋织构。基于密度泛函理论计算,我们发现可以通过铁电极化可以进一步调节自旋霍尔电导(spinHallconductivity,简记为SHC),通过计算得到自旋霍尔电导的一个分量σxyz在带边缘附近可以达到100?/e(?cm)-1的量级,其主要原因在于电极化改变了能带结构。该研究工作为可控的自旋输运的实验和理论研究具有重要的价值,必将推动自旋电子学的进一步发展。     

Flexible Porous Organic Polymer Membranes for Protonic Field-Effect Transistors

Artificial transistors represent an ideal means for meeting the requirements in interfacing with biological systems. It is pivotal to develop new proton-conductive materials for the transduction between biochemical events and electronic signals. Herein, the first demonstration of a porous organic polymer membrane (POPM) as a proton-conductive material for protonic field-effect transistors is presented. The POPM is readily prepared through a thiourea-formation condensation reaction. Under hydrated conditions and at room temperature, the POPM delivers a proton mobility of 5.7 × 10⁻³ cm² V⁻¹ s⁻¹; the charge carrier densities are successfully modulated from 4.3 × 10¹⁷ to 14.1 × 10¹⁷ cm⁻³ by the gate voltage. This study provides a type of promising modular proton-conductive materials for bioelectronics application.     

Toward nanograined gadolinia doped ceria via two-step sintering at ultralow temperature and its electrical conductivity

Highly dense (>98%) and nanograined (∼60 nm) gadolinia doped ceria are obtained from ultrafine powders by adopting two-step sintering (TSS) procedure at an ultralow temperature of 750 °C with a dwell time of 20 h, which is the lowest sintering temperature for ceria family without sintering aids up to now. Electrochemical impedance spectroscopy investigations suggest that the electrical conductivities of densified electrolytes are closely related to sintering temperature and grain size, and GDC900-750 exhibits the highest total electrical conductivity of 3.640 S m⁻¹ at 700 °C in air. Fitting calculation indicates partial grain-size dependence of oxygen vacancy association enthalpy and grain-size independence of oxygen ion migration enthalpy. Grain boundary maturity influences on grain boundary conductivity to some extent, and younger grain boundary endues the densified electrolytes with higher grain boundary conductivity.     

Investigation on low-temperature sintered AlN nanoceramics with high thermal conductivity

The aim of this research was to investigate the effect of sintering additive and relatively low-sintering temperature on the thermal conductivity of aluminum nitride nanoceramic. While using nanosized AlN powder and liquid-phase sintering additives, the various sintering processes were performed at temperatures 1400 and 1500°C for several hours. In the analysis methods, thermal conductivity (K) and thermal diffusivity (α) were measured using thermal conductivity analyzer (Hot Disk), scanning electron microscope (SEM) was used to observe the surface morphology of the microstructure, x-ray diffraction analyzer (XRD) to analyze the grain size and crystal structure, Raman spectroscopy (Raman) emission spectrum was analyzed to identify the material microstructure and the densities of AlN specimens were measured by Archimedes method. It was found that the thermal conductivity is related to the densification of nanosize low-temperature sintered material, which can be controlled by additives and sintering temperature. With Y₂O₃ sintering add, the densification of AlN for low-temperature sintering increased by the factor of ～5% to ～12%, and the thermal conductivity was enhanced by 25%. The relative density observed in this research is about 78%-84%, and the thermal conductivity measured is in the range of 9-14 W/mK.     

Wire electrical discharge machinable SiC with GNPs and GO as the electrically conducting filler

SiC based composites filled with graphene nano-platelets (GNPs) or graphene oxide (GO) prepared by rapid hot-pressing exhibit sufficient electrical conductivity for their machinability by wire electro-discharge machining (WEDM). Composites microstructure anisotropy caused by graphene alignment as a consequence of rapid hot pressing was confirmed by measuring of electrical conductivity and thermal diffusivity. Electrical conductivity increased significantly with increased weight fraction of graphene in both measured directions. Highest value of 2031 S/m was obtained for composites with 15 wt. % of GNPs in parallel direction and only 1246 S/m in perpendicular direction to aligned GNPs. Thermal diffusivity is 63.3 mm²/s in parallel and only 23.3 mm²/s in perpendicular direction. The increase of the electrical conductivity has resulted in successful WEDM. The MRR was almost doubled when the filler concentration increased from 5 wt. % GNPs/GO to 15 wt. % GNPs. At the same time, the surface roughness decreased.     

Thermodiffusion‐Assisted Pyroelectrics—Enabling Rapid and Stable Heat and Radiation Sensing

Sensors for monitoring temperature, heat flux, and thermal radiation are essential for applications such as electronic skin. While pyroelectric and thermoelectric effects are suitable candidates as functional elements in such devices, both concepts show individual drawbacks in terms of zero equilibrium signals for pyroelectric materials and small or slow response of thermoelectric materials. Here, these drawbacks are overcome by introducing the concept of thermodiffusion‐assisted pyroelectrics, which combines and enhances the performance of pyroelectric and ionic thermoelectric materials. The presented integrated concept provides both rapid initial response upon heating and stable synergistically enhanced signals upon prolonged exposure to heat stimuli. Likewise, incorporation of plasmonic metasurfaces enables the concept to provide both rapid and stable signals for radiation‐induced heating. The performance of the concept and its working mechanism can be explained by ion–electron interactions at the interface between the pyroelectric and ionic thermoelectric materials.     

Electro-Thermal model of thermal breakdown in multilayered dielectric elastomers

Energy transduction of dielectric elastomers involves minute electrical and mechanical losses, both of which potentially increase the temperature within the elastomer. Thermal breakdown of dielectric elastomers occur when heat generated therein cannot be balanced by heat loss on the surface, which is more likely to occur in stacked dielectric elastomers. In this article an electro-thermal model of a multilayered dielectric elastomer able to predict the possible number of layers in a stack before thermal breakdown occurs is presented. Simulation results show that point of breakdown is greatly affected by an increase in surrounding temperature and applied electric field. Furthermore, if the stack diameter is large, thermal insulation of the cylindrical surface is a valid approximation. Two different expressions for the electrical conductivity are used, and it is concluded that the Frank-Kamenetskii expression is more conservative in prediction of point of breakdown than the Arrhenius expression, except at high surrounding temperature. © 2018 American Institute of Chemical Engineers AIChE J, 65: 859–864, 2019     

Pressureless all-solid-state sodium-ion battery consisting of sodium iron pyrophosphate glass-ceramic cathode and β″-alumina solid electrolyte composite

In recent years, the expansion of demand for lithium ion batteries has resulted in soaring prices of the constituent resources. From the viewpoint of safety, studies on all-solid-state batteries are actively being carried out. In this study, we succeeded in driving all-solid-state batteries derived from nontoxic oxide glasses at room temperature without requiring scarce resources such as lithium and cobalt. The main structure of the ceramic batteries with a simple structure in which Na₂FeP₂O₇ crystallized glass and β″-alumina solid solution are joined by pressureless cofiring at 550°C. During the crystallization of Na₂O-Fe₂O₃-P₂O₅ glass, fusion with the β″-alumina solid solution is achieved. Reversible charge and discharge of 80 mAh/g were achieved at room temperature. It is not necessary to apply pressure during cell preparation or the use of the batteries. Furthermore, the strong junction at the cathode and electrolyte interface does not peel off during charge and discharge over a long period of 623 cycles. Ex situ X-ray photoelectron spectroscopy revealed partial Fe⁴⁺ induction and a reversible charge and discharge reaction even after overcharging to 9 V. It was demonstrated that Na₂FeP₂O₇ is very stable against overcharging to 9 V.     

Imaging the Curie Point isothermal surface and predicting its impact on the geothermal regime within the Nile Delta,Egypt

The available aeromagnetic data together with information from some available wells have been used in the current study to shed the light on the geothermal setup of the Nile Delta Province. The aeromagnetic data was reduced-to-pole and critically analyzed using the Spectral Analysis Technique through the Fast Fourier Transform (FFT), to determine the expected depths to the Basement and Curie Point (CPD) surfaces. The geothermal gradient between CPD and earth's surface was estimated, and accordingly the heat flow was evaluated using the proposed thermal conductivity. Then, the Basement Surface Temperature (BST) was estimated, by which the geothermal gradient and heat flow for the igneous-rocky basement and sedimentary-rocky horizon was independently predicted. By which, it could be possible to distinguish between the heat flow contribution from each horizon separately.